Jump to content

The Time Vortex Activator


Time02112
 Share

Recommended Posts

<font size="1" color="#FF0000">LAST EDITED ON 18-Dec-01 AT 09:52PM (EDT)</font>

 

<font size="1" color="#FF0000">LAST EDITED ON 18-Dec-01 AT 09:52 PM (EDT)</font>

 

http://quicksitebuilder.cnet.com/jcattera//sitebuildercontent/sitebuilderpictures/tva8.jpg

 

James Catterall's " Time Vortex Activator"

 

Here's your chance to build a time machine that really works! Don't get fooled by the "flux capacitor" gimmick from "Back to the Future" - there is no just thing! To go through time it takes the special materials and instructions that you'll only find in my kit. My Time Travel design is based upon the "Tesla" and "Time Vortex" theories, and my device has proven these theories correct! The device operates on two natural power sources. The first natural power source is created by Earth's Magnetic field at the North and South Poles. The coils surrounding the device induce(draw) the low voltage power needed to operate the device. The second natural power source is created by a "Time Vortex" which supplies appropriate power and the gateway to launch the device into time. Traveling through the future or the past will be the operator's choice with the use of the time selector(shown in the above drawing). The time selector communicates the time destination to the activator coils via telemetry. The activator coils, in turn, communicate the information to the "Time Vortex". Simply, there is no need for a separate power supply! ---James Catterall 50651 Walpole St. New Baltimore, MI 48047 Email: <[email protected]>

 

http://quicksitebuilder.cnet.com/jcattera/backup.html

 

There is only one problem with the device. The device will not launch into the year 2012 or 2013. I'm not sure exactly why, but when activated to that year the device is sent back to the "present time" on each attempt. There shouldn't be any difficulty traveling beyond the year 2013 or before 2012. Try to avoid traveling within the years 2010 and 2015. There appears to be much distruption in the Earth's magnetic field between this time range.

 

Have you ever been interested in the future or the past? I think we've all had an interest at some point in our lives to travel through time to encounter past events and experiences that we've only been able to read in books and pictures.

 

Well, here's your chance to build a time machine that really works! Don't get fooled by the "flux capacitor" gimmick from "Back to the Future" - there is no just thing! To go through time it takes the special materials and instructions that you'll only find in my kit. My Time Travel design is based upon the "Tesla" and "Time Vortex" theories, and my device has proven these theories correct!

 

Just think of the idea of viewing, in person, your mother and father when they were kids? Or, to visit a long lost relative that you never met because you were to young or never even born yet? Or, even travel into the future to meet your children when they are older than you. Well, here's your chance!

 

If you order the "Time Vortex Activator Plans and Instructions" you'll have a detailed list of materials that you'll need to acquire. If you order the "Time Vortex Activator Kit" you'll have every thing you'll need to build your very own time machine.

 

How does this device operate?

 

The device operates on two natural power sources. The first natural power source is created by Earth's Magnetic field at the North and South Poles. The coils surrounding the device induce(draw) the low voltage power needed to operate the device. The second natural power source is created by a "Time Vortex" which supplies appropriate power and the gateway to launch the device into time. Traveling through the future or the past will be the operator's choice with the use of the time selector(shown in the above drawing). The time selector communicates the time destination to the activator coils via telemetry. The activator coils, in turn, communicate the information to the "Time Vortex". Simply, there is no need for a separate power supply!

 

So, what is a Time Vortex?

 

It is a loophole that has the capabilitily to carry an object into the future or past, and as far as we know, these loopholes had always existed on Earth as one of Earth's unknown mysteries. Maybe they were left by the aliens to transport themselves to Earth from distant galaxies? No one knows. "Time Vortexs" are not easy to find. They are invisible entities that exist and are naked to the human eye. It is believed that some forms of life on Earth can see them, for example: insects, bats, etc., They have a greater sense for detecting obects around them.

 

Do "Time Vortex's have any relation to "Crop Circles"?

 

Recently, "Crop Circles" were proposed to be hoaxes, but the majority of "Crop Circles" are still unexpIained. Many are still forming with no evidence of anyone creating them. There is a strong similarity of the shape of the circles in the corn and wheat fields that are laid down, and the circular shape that the "Time Vortex" consumes. Knowing that "Time Vortex's" appear for short periods of time and relocate in other locations could explain some of the many mysteries behind "Crop Circles".

 

How do I launch myself into time?

 

When a "Time Vortex" is located and the Vortex Activator device is positioned over it, the operator must sit inside the triangular structure with both legs crossed "Indian style". The designated time is entered into the "Time Selector Device" ie. (day/month/year). When the operator is ready, the device will activate when the operator pushes the "red" button located on the "Time Selector Device". The triangular frame and operator will dissappear in the current time and reappear into the destinated time. The Vortex Activator will travel along with the operator in order to get back to the "present time".

 

Are the materials and dimensional tolerances important for the device to operate properly?

 

The materials and dimensional tolerances needed to construct this device are very crucial in allowing the device to operate properly. It is very important that the materials are precision cut within the correct dimensional tolerances. If not, the device will not operate. The "Time Vortex Activator Kit" comes with these precise pre-cut parts. Although, the "Time Vortex Activator Plans and Instructions" are very easy to follow, a person may find it very difficult to obtain the correct materials, ie. wire gage type, length of cut, proper alignment of parts, etc. to allow the device to operate properly. Unless the person is highly skilled in making fine cuts, soldering, and has a good knowledge of materials, I would highly suggest in ordering the "Time Vortex Activator Kit".

 

When the device is fully assembled, it is the operator's task to locate a "Time Vortex". "Time Vortex's" are not hard to locate if the operator has the tools and knowledge to find them. Your order will explain how to locate them in a lot greater detail, included in both Items #1 and #2.

 

<hr size="1" width="80%" color="#000099" align="left">"Everything you know,...is Wrong!

 

soon we shall all discover the truth."

 

http://profiles.yahoo.com/vosstech

 

 

Link to comment
Share on other sites

  • Replies 15
  • Created
  • Last Reply

Top Posters In This Topic

I'm very skeptical about this Time Vortex Activator. This James Catterall even admits people are skeptical himself!

 

First of all, if Time vortexes are that strong a natural power source that all is required is a few unpowered coils wrapped around a pyramid frame thingy, then surely other objects than a time vortex activator would be adversely affected when passing through one, like say, an automobile were to pass through one by accident.

 

The simplicity of the remote controlled controller is a bit iffy too, like you can only select day/month/year but not down to specific hours or minutes even? And it seems a bit ridiculous operating it by remote control when you have to be inside the frame for it to work anyway.

 

The frame itself is probably supposed to have special powers, but we are not even hinted to what it is made out of. It could simply be aluminium or some common metal or alloy, or for all we know the one we see in the photo could even be plastic!

 

And if so many people have successfully tried this thing and put feedback, like one of them said, how come it isn't on TV yet? Surely info on this thing would have slipped to the media somewhere along the line! Even those feedbacks I doubt their genuinity.

 

If time travel was that simple, I'm sure there would be a time vortex activator in 3 out of 5 western world households by now, don't you?

 

I'm more believing in the Star Chamber project than this, and that one seems far-out enough!

 

-Raze

 

 

Link to comment
Share on other sites

http://www.bradandsherry.com/clock.gif

 

Please take notice, I have sent a few emails out to James over this weekend, 2 requesting arrangements to contact him to make

 

arrangements for delivery of his Time Vortex device, and one inviting him to sign up to our TTR Forum, thus I am still awaiting his reply.

 

Also note that as of today, 03 Dec. 2001 his website is currently "Un-Available"

 

I will keep everyone updated on any new updates as they progress

 

regarding this matter.

 

http://ww1.comteck.com/~doctor/spaceship2/maginew2bap3.gif

 

---T12 of TAP-TEN MAGI

 

<hr size="1" width="80%" color="#000099" align="left">"Everything you know,...is Wrong!

 

soon we shall all discover the truth."

 

http://profiles.yahoo.com/vosstech

 

 

Link to comment
Share on other sites

Have you actually ordered one and paid it already? He's probably gone and done a runner on everyone if it is indeed all a load of crap *l*

 

How long has his site actually been up for before it's shutdown?

 

I know I don't even like the idea of buying products online off reputed secure sites like Danoz Direct, letalone someone who claims to be selling this far-out piece of equipment and possibly conning a lot of people out of money along the way!

 

-Raze

 

 

Link to comment
Share on other sites

Although I have taken a look at the machine's online photo, I can say that I can not see how it would do anything. Never the less; we, at TAP-TEN Research, are researchers and must follow our hypothesis with tests. If I were to discredit the device without ever having tested it, then I would be a hypocrite, after all, we at TAP-TEN are trying to accomplish time travel.

 

Regards,

 

Edwin G. Schasteen

 

 

Link to comment
Share on other sites

Definitely... We'd all like to actually see a real working time machine come about! But, at the same time, all possibilities must be looked at. I'm not saying that I totally disbelieve this machine, but let's just say that I would be very... *VERY* suprised if this Time vortex activator is the genuine thing.

 

I guess that I like to know something is true 100% before I put my beliefs and focus into something in the thought that it is real, there's nothing worse than believing in a false hope then finding out one day it is not the case, like for example if a child finds out he/she is adopted or something...

 

And in this case with the TVA, it just seems the unlikeliness far outweighs the likeliness, especially when you consider this James Catteral fella is intending to make a profit out of this!

 

Some good advice is one thing to really watch out for with anything on the net is when someone advertises a too good to be true product or service at a cost. If he was giving away info on how to build a TVA online for free, this would be a different story. False or True, I may be then inclinded to give it a shot, how would he benefit out of it by lying then?

 

Catteral was even selling a cheaper TVA kit that didn't actually include the parts, mainly instructions on how to build it and what parts you need, but even this costed a fair amount money!

 

Surely if he was worried about people stealing his idea he would have patented it, which obviously he hadn't. This being the case, someone else who builds the thing could easily claim it as their own design!

 

Perhaps if anyone reading this has ordered one or knows of someone who has, and there must be someone out there who has... Let us know!

 

-Raze

 

 

Link to comment
Share on other sites

Raze I can answer that one for ya, This is the second time it's been taken down (presumbly) by CNET.

 

I sent him a email the first time saying that it was down and came back up, but he never replied, It only seems to stay around for a few weeks before it's shut down.

 

I think CNET is going to keep a eye on this site so that if that if it comes back up again it won't be up very long.

 

Tracker

 

 

Link to comment
Share on other sites

...Meanwhile,

 

Until further notice, the Jury shall continue to remain in "open- session" on this one!

 

http://paranormal.about.com/library/graphics/timetravel.jpg<hr size="1" width="80%" color="#000099" align="left">"Everything you know,...is Wrong!

 

soon we shall all discover the truth."

 

http://profiles.yahoo.com/vosstech

 

 

Link to comment
Share on other sites

I don't think anyone "selling" a time machine is legitimate. If I had a time machine, I wouldn't need to sell it. I would just take a look at the good old lotto numbers and travel back in time a day or so and buy the winning ticket. I could be so filthy rich that I wouldn't need to sell time machines on the side. If I really wanted to distribute them so others could share the glory, I would just give them away. If anyone doesn't do that, they are either a fraud or an idiot.

 

 

Link to comment
Share on other sites

  • 1 month later...

:)

 

I plan on buying the Vortex Activator.

 

If it works, I will try to post my result.

 

James emailed me, and he seems on the up and up.

 

I hope for the best.

 

Oh, by the way, you CANNOT use the device to get lotto number;

 

the reason is that you go to an Alternate time-line.

 

Also, if you get a newspaper(WTJ) from 2005 you CANNOT use if for stock picks, same reason.

 

It is great to be able to go back to the past and pat your dog when he was alive, or talk to grandpa,

 

but any changes you make are to an alternate worldline, not this one.

 

If anyone is using the device please email me at

 

[email protected]

 

 

Link to comment
Share on other sites

  • 3 weeks later...

Why would you automatically go to an alternate universe if you were to use it for lotto tickets? It stands to reason that this device should be able to be used to bring objects from the future if it in fact works. But what is really strange to think about is that the matter that say comprises an object like a newspaper would probably still be a tree in this time if it exists at all. I'm wondering if there would be strange effects with what seems like exact copies of matter existing here or just matter from the future. I probably make no sense but I'm just trying to understand it. ;)

 

 

Link to comment
Share on other sites

  • 3 weeks later...

I know this seems very skeptic but I don't think any machine can bridge us across the time gap. there is so much MASS to pull across.Instead, Turn ourselves into pure light energy. You can only time Travel at the speed of light, right? So, rather than spend the next 20 to 30 years trying to build a vehicle that fast!But then again, we have all the time in the world.

 

 

Link to comment
Share on other sites

  • 6 months later...

Here is my current working idea for time device check my site for flow drawings

 

Computer Time Server or CTS.

 

Concept: Set up a dedicated computer time server ( linix box would be nice more reliable

 

check walmart.com for $299 box) with battery back up and all redundant back up possible

 

this would sink to atomic clock through phone or gps.

 

Step one: Construct message program that will send text or Morse code pulses or test

 

pulses at a precise dedicated time, this would be possible for current and future time. In

 

other words enter simple message and then enter time of transmission (insertion) then time

 

of reception (released time). The first step would be to get this box to work with in itself.

 

In other words to type test message then send in 5 minutes the program would do itself,

 

than receive in 3 days. You have just sent a message to the future. So far this is similar to

 

a time announce or digital assistant program. A wake up call if you will (but with your

 

message). Also a complete log would be kept of transmitted and received pulses.

 

Step two: Send message back in time.

 

Enter message time of transmission than time of reception, the message would then leave

 

on a digital or analog I/O card (basically a card that interfaces your computer to external

 

hardware similar to remote control devises or PLC's Programmable logic controllers)

 

this message would be inserted into the external Hardware i.e. (transmitter /receiver)

 

External hardware: This is the tricky part, obviously the computer is always on ready to

 

transmit and receive from this external device. It must be left on and message event must

 

proceed at a designated time. At first it would be easier to send a series of cascading

 

counting pulses that vary each transmission so you can decipher when in the future that

 

pulse would occur. Example you no that on Tuesday 1000 hours it will send 10 pulses so

 

if on pre-Monday you receive 10 pulses you have received a message from the future

 

(assuming theses pulse have come from your external hardware not internal from the

 

computer remember the computer can send pulses forward through time not back) This

 

future event would be controlled by the computer not you! no time paradox here, like I

 

forgot to type the pulse so how could the past receive it.

 

External time box this is where I am brain storming. The box would transmit/receive

 

Light, RF, Radiation, Particles or what ever method or modulation proves time

 

susceptible, it good be an accelerator or decelerator (absolute zero). maybe the reflections

 

of the past would be show in the future (remember we are talking simple pulses here) This

 

external hardware would also need to be vary reliable, always on so to speak.

 

To me this is the elemental basis of  a workable time server or traveler, the pulses travel

 

they are better equipped to do it..

 

Pro's: No time paradox, no living matter, simple pulse transmission- reception

 

Con's: no proven time transmitter (at least for sending to past)

 

Please send me your ideas for time transmitter or field generator to transmit into,

 

sendto: [email protected]        'Vision through electronics.'   I am planing to build in

 

my garage, not joking, if it doesn't work out, hey I still get some good electronics out of

 

the experiment. (:

 

Project title:  Time Server Project

 

related equipment,  Time server, Time reference, Time transmitter.

 

Website:http://www.geocities.com/vistronic/index.html

 

Imagine sending the lotto numbers to the past! HAHA that would cover the costs!

 

This is a new idea as far as I know, I thought details of it yesterday , although ever since I

 

started in broadcasting I entertained the idea of transmitting through time and how to do

 

it. My recent contract computer work and knowledge tied the transmitter to the server in

 

my mind, mainly for logging, tracking and analyze, recording and timed transmission and

 

so on.

 

Let me say this project is in the conceptual stage (its only been one day of official work on

 

the time server).

 

I did a time search on MSN for time travel and it lead me here.

 

Let me say I know transmitters I have worked and tested, trouble shooted full power TV

 

and FM transmitters analog and digital, I was a chief engineer for a TV station for over

 

ten years. I have a AAS degree in broadcast electronics. I also am a certified commercial

 

electrician and not to bad with computers I built (put together) the one I am using now. I

 

say this not to brag (it was a lot of work and study) but to establish some creditability as I

 

have read a lot of wild posts in this area. (which is good let freedom ring).

 

Look for a web site (geo cities) soon (for real) under search word vistronics to present

 

this and many other ideas. I lost or someone ripped off my Hand spring Visor platinum

 

PDA, so some ideas are lost (yes I back up but I got hit with the lovebug virus and had to

 

reformatt both my computers than I took a trip with out backing up anyway....)

 

On to your comments,

 

The core idea is to send numbers (code) through time.

 

If you will, think, of a time 'SETI' a 'search for extra temporal transmissions', instead of

 

extraterrestrial. The movie contact showed a form of this when they replayed the 'Hitler

 

TV broadcast', not like what I propose, but you get the idea.

 

I think this idea will work because its electrons, or particles or a Light wave or a RF

 

envelope that is doing the time travel (what ever method by trail and error experiment

 

proves itself.)

 

I mean lets start at the beginning, you know take baby steps, before getting online and

 

saying I got a time machine you can jump in.

 

Like Marconi in the early radio days with a spark gap transmitter, did he build a TV

 

transmitter? No but it lead to it. Exact parallel to the Time Server.

 

Much of what I described uses existing technology, but to transmit through time you need

 

a hole or a field (maybe you do not need this), a zone of non-temporality, a door so to

 

speak (or a peep hole), you know what is great about this idea is only needs to be a pin

 

hole to focus your RF (High F microwave) Beam or it could be laser, or modulated Ions

 

like in a klystron transmitter Particle Beam. Again trail and error experiments, scientific

 

observation of data, hard work and experamentation is needed.

 

Do you think some one just sat down and dreamed up TV?

 

I have several Ideas for the Time transmitter, one borrows from the alternate energy

 

people, of High speed spinning magnets, creating magnetic fields in a cylinder (of varying

 

polarity), and what is happening at the center of this field, the middle of this cylinder?

 

could this be the place to focus the message beam? And what if we density modulated this

 

area with a klystron beam?. Which is contained by magnetic force? Would the remnant

 

show through time? what of the harmonics? What about a microwave beam? Instead of

 

magnets what if we used super high voltage to generate a field 250KV plus? What then?

 

Do you know?  To create fields of this power and intensity require a lot of power 480

 

Volt AC 3 phase at a hundred amps. (Imagine that wired to my garage LOLL)

 

This Idea may not work, but with out experiment I can not say. But I have 2 more of my

 

own ideas for the transmitter not to much related to above. (notice we have not talked yet

 

about the receiver)

 

I am a big fan of OPEN SOURCE so share your ideas.

 

I am a applied technology guy I want generate data drawings ect.

 

I like to wax Philosophic sometimes but I am here for nuts and bolts and planning.

 

http://www.geocities.com/vistronic/index.html

 

 

Link to comment
Share on other sites

  • 4 weeks later...

Friends of TR125.0121

 

Temporal Vortexes are not unheard of, however by definition they exist outside the gravity well of another object. This is due to the fact that a temporal vortex is in itself an inversely proportional depression of the time/space continuum. Therefore a temporal vortex could not exist within the vicinities of another gravity projecting object. However, wormhole tails are know to sweep Earth´s magnetic field from time to time at regular intervals but that would only take you to another place in this universe, not neccessarily another planet, but an asteroid, a star or simply space.

 

Until later becomes now.

 

 

Link to comment
Share on other sites

 Share

×
×
  • Create New...